Merge branch 'Crowdin' into bdb_orig

Dependencies/LoopKit/LoopKitUI/fr.lproj/Localizable.strings

@@ -81,7 +81,7 @@
 "com.loudnate.LoopKit.errorAlertActionTitle" = "OK";
 
 /* The title for the override emoji condition section */
-"Condition" = "Condition";
+"Condition" = "Conditions";
 
 /* Title of the setup button to continue */
 "Continue" = "Continuer";

Dependencies/rileylink_ios/OmniKitUI/fr.lproj/Localizable.strings

@@ -15,7 +15,7 @@
 "%@ U (Finished)" = "%@ U (Terminé)";
 
 /* Format string for bolus progress. (1: The delivered amount) (2: The programmed amount) (3: the percent progress) */
-"%@ U of %@ U (%@)" = "%1$@ U of %2$@ U (%3$@)";
+"%@ U of %@ U (%@)" = "%1$@ U sur %2$@ U (%3$@)";
 
 /* Format string for temp basal rate. (1: The localized amount) */
 "%@ U/hour" = "%@ U/heure";
@@ -36,7 +36,7 @@
 "Active Time" = "Heure d’activation";
 
 /* The title of the cell showing the Pod Active Clock */
-"Pod Active Clock" = "Pod Active Clock";
+"Pod Active Clock" = "Horloge active Pod";
 
 /* The title of the cell showing alarm status */
 "Alarms" = "Alarmes";
@@ -72,7 +72,7 @@
 "Configuration" = "Configuration";
 
 /* The title of the Insulin Type */
-"Insulin Type" = "Insulin Type";
+"Insulin Type" = "Type d'Insuline";
 
 /* The title of the continue action in an action sheet */
 "Continue" = "Continuer";
@@ -106,16 +106,16 @@
 "Error enabling bolus beeps" = "Erreur lors de l’activation des bips de bolus";
 
 /* The alert title for enable Confirmation Beeps */
-"Enable Confirmation Beeps" = "Enable Confirmation Beeps";
+"Enable Confirmation Beeps" = "Activer les bips de confirmation";
 
 /* The alert title for Disable Confirmation Beep */
-"Disable Confirmation Beeps" = "Disable Confirmation Beeps";
+"Disable Confirmation Beeps" = "Désactiver les bips de confirmation";
 
 /* The alert title for enable Automatic Bolus Beeps */
-"Enable Automatic Bolus Beeps" = "Enable Automatic Bolus Beeps";
+"Enable Automatic Bolus Beeps" = "Activer les bips de Bolus automatiques";
 
 /* The alert title for Disable Automatic Bolus Beeps */
-"Disable Automatic Bolus Beeps" = "Disable Automatic Bolus Beeps";
+"Disable Automatic Bolus Beeps" = "Désactiver les bips de bolus automatiques";
 
 /* The alert title for a resume error */
 "Error Resuming" = "Erreur lors de la reprise";
@@ -249,13 +249,13 @@
 "Unknown" = "Inconnu";
 
 /* The title of the diagnostics section in settings */
-"Diagnostics" = "Diagnostics";
+"Diagnostics" = "Diagnostic";
 
 /* The diagnostic command Read Pod Status */
-"Read Pod Status" = "Read Pod Status";
+"Read Pod Status" = "Lire l’état de la pompe";
 
 /* The diagnostic command Read Pulse Log */
-"Read Pulse Log" = "Read Pulse Log";
+"Read Pulse Log" = "Lecture journal d'impulsion";
 
 /* The title of the pod details section in settings */
-"Pod Details" = "Pod Details";
+"Pod Details" = "Détails du Pod";

Dependencies/rileylink_ios/OmniKitUI/fr.lproj/OmnipodPumpManager.strings

@@ -59,7 +59,7 @@
 "rcC-ke-lUP.headerTitle" = "Appliquez le POD";
 
 /* Class = "UILabel"; text = "Label"; ObjectID = "vEc-Km-ewe"; */
-"vEc-Km-ewe.text" = "Label";
+"vEc-Km-ewe.text" = "Étiquette";
 
 /* Class = "UILabel"; text = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep RileyLink adjacent to the pod during pairing."; ObjectID = "vmF-Dc-3DS"; */
 "vmF-Dc-3DS.text" = "Remplissez un nouveau pod avec de l’insuline. Vérifiez de bien entendre les 2 beeps du pod pendant le remplissage. Gardez le RileyLink à proximité du pod pendant l’appairage.";

Dependencies/rileylink_ios/RileyLinkKitUI/fr.lproj/Localizable.strings

@@ -5,28 +5,28 @@
 "Connected" = "Connecté";
 
 /* The in-progress connecting state */
-"Connecting" = "Connexion en cours";
+"Connecting" = "De liaison";
 
 /* The title of the cell showing BLE connection state */
-"Connection State" = "État de la connexion";
+"Connection State" = "Etat de connexion";
 
 /* The title of the section describing the device */
-"Device" = "Appareil";
+"Device" = "Dispositif";
 
 /* The title of the devices table section in RileyLink settings */
-"Devices" = "Appareils";
+"Devices" = "Dispositifs";
 
 /* The disconnected state */
-"Disconnected" = "Déconnecté";
+"Disconnected" = "Débranché";
 
 /* The in-progress disconnecting state */
-"Disconnecting" = "Déconnexion en cours";
+"Disconnecting" = "Se déconnecter";
 
 /* The title of the cell showing firmware version */
-"Firmware" = "Firmware";
+"Firmware" = "Microprogramme";
 
 /* The title of the cell showing current rileylink frequency */
-"Frequency" = "Frequency";
+"Frequency" = "Fréquence";
 
 /* The title of the cell showing device name */
 "Name" = "Nom";
@@ -38,58 +38,58 @@
 "Signal Strength" = "Force du signal";
 
 /* The header of the cells showing connection monitoring */
-"Connection Monitoring" = "Connection Monitoring";
+"Connection Monitoring" = "Supervision";
 
 /* The title of the cell showing uptime */
-"Uptime" = "Uptime";
+"Uptime" = "Temps de fonctionnement";
 
 /* The title of the cell showing battery level */
-"Battery level" = "Battery level";
+"Battery level" = "Niveau de batterie";
 
 /* The title of the cell showing Voltage */
-"Voltage" = "Voltage";
+"Voltage" = "Voltage (Tension)";
 
 /* "The title of the section for alerts" */
-"Alert" = "Alert";
+"Alert" = "Alerte";
 
 /* The title of the cell showing Low Battery Alert */
-"Low Battery Alert" = "Low Battery Alert";
+"Low Battery Alert" = "Alerte de batterie faible";
 
 /* Header of list showing battery level alert options */
-"Battery level Alert" = "Battery level Alert";
+"Battery level Alert" = "Alerte de niveau batterie";
 
 /* Battery level alert OFF in list of options */
-"OFF" = "OFF";
+"OFF" = "Désactivé";
 
 /* The title of the command to update diagnostic LEDs */
-"Diagnostic LEDs" = "Diagnostic LEDs";
+"Diagnostic LEDs" = "Diagnostic";
 
 /* The title of the command to fetch RileyLink statistics */
-"Get RileyLink Statistics" = "Get RileyLink Statistics";
+"Get RileyLink Statistics" = "Obtenir les statistiques de RileyLink";
 
 /* The title of the command to invert BLE connection LED logic */
-"Invert LED Logic" = "Invert LED Logic";
+"Invert LED Logic" = "Inverser la logique des LED";
 
 /* The header of the cells showing test commands */
-"Test Commands" = "Test Commands";
+"Test Commands" = "Commande de test";
 
 /* The title of the cell showing Lighten Yellow LED */
-"Lighten Yellow LED" = "Lighten Yellow LED";
+"Lighten Yellow LED" = "Éclaircir la LED jaune";
 
 /* The title of the cell showing Lighten Yellow LED */
-"Lighten Red LED" = "Lighten Red LED";
+"Lighten Red LED" = "Éclaircir la LED rouge";
 
 /* The title of the cell showing Test Vibration */
-"Test Vibration" = "Test Vibration";
+"Test Vibration" = "Test de la vibration";
 
 /* The title of the cell for sounding device finding piezo */
-"Find Device" = "Find Device";
+"Find Device" = "Localiser l'appareil";
 
 /* The title of the cell for connection LED */
-"Connection LED" = "Connection LED";
+"Connection LED" = "Connectez les LED";
 
 /* The title of the cell for connection vibration */
-"Connection Vibration" = "Connection Vibration";
+"Connection Vibration" = "Vibreur de connexion";
 
 /* Detail text when battery alert disabled. */
 "Off" = "Off";

FreeAPS/Sources/Localizations/Main/es.lproj/Localizable.strings

@@ -1062,7 +1062,7 @@ Un 1.0 de valor permite un ajuste completo con el nuevo factor de sensibilidad d
 "Minimum duration in minutes between two enacted SMBs" = "Duración mínima en minutos entre dos SMBs aprobados";
 
 /* "Bolus Increment" */
-"Smallest possible SMB amount in oref0. For Medtronic the smallest possible amount is 0.1 U. For Omnipod the smallest possible amount is 0.05 U." = "Smallest possible SMB amount in oref0. For Medtronic the smallest possible amount is 0.1 U. For Omnipod the smallest possible amount is 0.05 U.";
+"Smallest SMB / SMB increment in oref0. Smallest insulin amount for Medtronic pumps is 0.1 U, whereas for Omnipod  it’s 0.05 U. The default value is 0.1." = "Smallest SMB / SMB increment in oref0. Smallest insulin amount for Medtronic pumps is 0.1 U, whereas for Omnipod  it’s 0.05 U. The default value is 0.1.";
 
 /* "Insulin Peak Time" */
 "Time of maximum blood glucose lowering effect of insulin, in minutes. Beware: Oref assumes for ultra-rapid (Lyumjev) & rapid-acting (Fiasp) curves minimal (35 & 50 min) and maximal (100 & 120 min) applicable insulinPeakTimes. Using a custom insulinPeakTime outside these bounds will result in issues with FreeAPS-X, longer loop calculations and possible red loops." = "Tiempo del máximo efecto de disminución de glucosa de la insulina, en minutos";

FreeAPS/Sources/Localizations/Main/zh-Hans.lproj/Localizable.strings

@@ -1058,7 +1058,7 @@ Enact a temp Basal or a temp target */
 "Minimum duration in minutes between two enacted SMBs" = "两次自动大剂量的最短时间";
 
 /* "Bolus Increment" */
-"Smallest possible SMB amount in oref0. For Medtronic the smallest possible amount is 0.1 U. For Omnipod the smallest possible amount is 0.05 U." = "Smallest possible SMB amount in oref0. For Medtronic the smallest possible amount is 0.1 U. For Omnipod the smallest possible amount is 0.05 U.";
+"Smallest SMB / SMB increment in oref0. Smallest insulin amount for Medtronic pumps is 0.1 U, whereas for Omnipod  it’s 0.05 U. The default value is 0.1." = "Smallest SMB / SMB increment in oref0. Smallest insulin amount for Medtronic pumps is 0.1 U, whereas for Omnipod  it’s 0.05 U. The default value is 0.1.";
 
 /* "Insulin Peak Time" */
 "Time of maximum blood glucose lowering effect of insulin, in minutes. Beware: Oref assumes for ultra-rapid (Lyumjev) & rapid-acting (Fiasp) curves minimal (35 & 50 min) and maximal (100 & 120 min) applicable insulinPeakTimes. Using a custom insulinPeakTime outside these bounds will result in issues with FreeAPS-X, longer loop calculations and possible red loops." = "胰岛素的最大降血糖作用，以分钟为单位";

FreeAPS/Sources/Modules/PreferencesEditor/PreferencesEditorStateModel.swift

@@ -203,7 +203,7 @@ extension PreferencesEditor {
                 Field(
                     displayName: "Bolus Increment",
                     type: .decimal(keypath: \.bolusIncrement),
-                    infoText: NSLocalizedString("Smallest possible SMB amount in oref0. For Medtronic the smallest possible amount is 0.1 U. For Omnipod the smallest possible amount is 0.05 U.", comment: "Bolus Increment"),
+                    infoText: NSLocalizedString("Smallest SMB / SMB increment in oref0. Smallest insulin amount for Medtronic pumps is 0.1 U, whereas for Omnipod  it’s 0.05 U. The default value is 0.1.", comment: "Bolus Increment"),
                     settable: self
                 )
             ]